PROJECT HIGHLIGHTS
Commissioned March, 2008
Commercial WW, New Construction
Permit(s); Discharge
8/NA/NA (TN/TP/Turbidity)
Yacht Company Ocean
MMF Capacity: 0.03 MGD
$44.0/gal
1 FTE (Full‐Time Employees)
The facility has received the certification of a Clean Marina by New Jersey’s Department of Environmental Protection.
DESCRIPTION
The Viking Yacht Company Wastewater Reclamation Plant has a design capacity of 25,000 gallons per day. The plant was designed to treat high influent loadings and to meet low ammonia and nitrogen limits of < 0.4 mg/L and < 8mg/L accordingly. ENVIROQUIP’s system not only meets the expected effluent limit requirements, but also provides the facility with the benefit of a small footprint, ease of operation, and lower maintenance costs. It also offered an overall cost savings on sludge hauling because of the plant’s ability to operate at a longer SRT and at a higher range of MLSS concentration.
LOCATION
Viking Yacht, NJ
IMAGES
PROJECT OVERVIEW
| System Type(s) | Ovivo MBR |
|---|---|
| Previous Facility Type | None |
| Owner | Viking Yacht Company |
| Engineer | Flett Engineer |
| Contractor | Viking Yacht Company |
| Operations | Owner |
| Delivery Method | Negotiation |
| Time To Retrofit | 9 months |
| Total Installed Project Cost | $1,100,000 |
PLANT DESIGN INFORMATION
| Fine Screen Type | Bar Screen |
|---|---|
| Aperture or Slot Size | 2 mm |
| Supplemental Aeration Technology | Coarse Bubble, Fine Bubble, Tubes |
| MBR Blower Type | Positive Displacement |
| Solids Management Data | Hauling |
| SCADA System | Wonderware |
| Disinfection Method | UV |
| # Process Stages | 3 |
MBR (MEMBRANE ZONE) DESIGN
| Filtration Mode | Pumped |
|---|---|
| # of Reactors : | 1 |
| Submerged Membrane Unit (SMU) | ES125, KUBOTA® |
| # SMU | 2 |
| Design Flux (MMF) | 13.8 gfd |
| Minimum Temperature | 13°C |
| Peak Factor | 2 |
| # of Maintenance Cleans | 3 |
